APR Lifecare

FEATURES
Suitable for adult, pediatric and neonatal patients
12.1'' TFT color LCD
Parameters: ECG, NIBP, SpO2, Pulse Rate, Respiration, Temperature and IBP (upgradable)
Maximum 8-channel waveform synchronous display
Graphic and tabular trends for 96 hours for all formats
Multi-screen format
Powerful data management and storage capacity, 500 NIBP measurement data can be storage and recall
AC/DC, built-in rechargeable lithium battery achieves uninterrupted monitoring
Visual and Audio alarms, adjustable.
Measurement Mode: Manual/Auto/Stat
SPECIFICATIONS
ECG:
5 lead or 12 lead selectable
Input: 5 lead; RA, LT, RL, LL, V or R, L, N, F, C
Lead selection: I, II, III, aVR, aVL, aVF, Vx, CAL
Gain Selection: ×25, ×0.5, ×1, ×2, auto
Sweep speed: 12.5mm/s, 25mm/s, 50mm/s
Accuracy: ±1bpm or ±1% whichever is grater
Protection: Withstand 4000V AC/50Hz voltage in isolation against electrosurgical and defibrillation
Calibration signal: 1mV±5%
Operation modes, Diagnostic, Monitor, Surgery
Heart rate range: Adult: 15-3000bpm; Pediatric/Neonatal: 15-350bpm
Measurement range: -2.0mV to 2.0mV
ST detection: YES,
Arrhythmia analysis: YES
Alarm: YES, audible and visual alarm, alarm events recallable.
NIBP:
Method: Oscillometry
Mode: Manual/Auto/STAT
Measurement Range: adult 10-270mmHg
Measurement Type: Systolic, Diastolic, Mean
Resolution: 1mmHg
NIBP Accuracy: Mean ±5mmHg, SD ±8mmHg
Alarm: SYS/DIA/MEAN
Respiration:
Method: RA-LL impedance
Measurement range: Adult: 0-120rpm, Paediatric/Neonatal: 0-150rpm
Apnea Alarm: YES
SpO2:
Measurement range: 0%-100%
Accuracy: ±2% (70%-100%); 0%-69% unspecified.
Alarm range: 0-100%
Pulse Rate:
Measurement range: 10 - 270
Resolution: 1bpm
Accuracy: ±2pm or ±2%
Temperature:
Resolution: 0.2 0C
Channel: Dual-channel
Measurement range: 0-50 0C
IBP (Upgradable):
Channel: 2
Pressure transducer: Sensitivity: 5(mV/V/mmHg)
Transducer sites: ART, PA, CVP, RAP, LAP, ICP
Alarm range: -10 to 300 mmHg
Other Specifications:
Net Weight: 3.9kg
CONTENT OF BOX
Monitor
Power connector
Adult/Neonatal cuff + cable (based on selection)
ECG leads
SpO2 probe
Temperature probe
User manual
Warranty : 1 Year

FEATURES::
Suitable for adult, pediatric and neonatal patient
Parameters measured: SPO2, NIBP, Pulse Rate, Temperature.
Applicable for medicine, surgery, ICU/CCU, emergency room, paediatrics, obstetrics, and gynaecology
8” high brightness TFT LCD display
Parameters: NIBP, SpO2 and pulse rate
High brightness LED display of NIBP, SpO2 and pulse rate with red and yellow highlight LED
Memory: Built-in Flash Memory
Up to 2000 groups NIBP data storage and 78000 groups SpO2 data storage for up to 48 hours
Powerful data storage and management (including trend table)
Adjustable Visual and Audio alarms
Built-in rechargeable Li-polymer battery backup (up to 4-6 hrs of working)
Can be used for indoor and outdoor monitoring.
USES OF CONTEC PATIENT MONITOR::
Contec patient monitor is an electronic device used for monitoring, measuring and recording various vital signs of the patient such as blood pressure, heart rate, glucose level for diabetic patients, body temperature and more. They are extremely useful to detect danger or health complications and monitor the progress of at-risk or bedridden patients, especially in the intensive care unit (ICU). Contec CMS 5100 patient monitor can be used to achieve a comprehensive diagnosis of the patient’s health.

WORKING OF CONTEC PATIENT MONITOR::

Contec CMS 5100 patient monitor comes with sensors that capture vital information about the patient’s health. These are attached to the patient's body and the data collected is then passed on to the capital equipment which is a monitor for further processing and interpretation and then presented to the doctors. The data transmission happens through interconnecting solutions like wires or PCBs. But this data needs to be converted into a readable format before presenting it to the doctors. This is done by an in-built software which breaks down the complex codes and simplifies the data in a readable format.
PRODUCT SPECIFICATIONS::
NIBP:
Method: Oscillometry
Mode: Manual/Auto/Continuous
Measurement Range: 25-260mmHg
Resolution: 1mmHg
NIBP Accuracy: ±5mmHg
Alarm: SYS/DIA/MAP
SpO2:
Measurement range: 0%-100%
Resolution: 1%
Accuracy: ±2% (70%-100%) 0%-69% unspecified.
Alarm range: 0-100%
Pulse Rate:
Measurement range: 10 - 270
Resolution: 1bpm
Accuracy: ±2pm or ±2%
Temperature:
Can measure temperature of adults, pediatric and neonatal patients.
Other Specifications:
Dimension (LxWxH): 191 x 160 x 244 (mm)
Net Weight: 1.5 kg
Content Of Box: Contec Patient Monitor
Monitor
Power connector and adaptor
Adult/Neonatal cuff + cable (based on selection)
SpO2 probe
Temperature probe
User manual
Warranty: 1 Year
Safety Information:
Read the label carefully before use
Keep out of reach of the children
Store in a cool dry place away from direct sunlight